How to Clean a Beard Trimmer in Four Easy Steps

This post will discuss why you should learn to clean the trimmer, how often you should do so, what you need, and the steps required for proper cleaning.
By
reviewed
Reviewed by
Last updatedLast updated: May 04, 2021
Shave Lab is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here
Shave Lab is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our process here

It might not seem like much to use your beard trimmer repeatedly without cleaning it. Unlike some of the other things you use to groom, like the shaving razor or the toothbrush, this device does not seem to accumulate enough stuff that can affect your health. However, if a beard trimmer is left for long without cleaning, it is liable to turn dangerous. That is why you should know how to clean a beard trimmer.

With this information, you will have enough to tide you over in your quest to maintain the cleanliness of your trimmer.

Why should you clean your beard trimmer?

How to Clean a Beard Trimmer in Four Easy StepsWhy should you spend some time in cleaning your trimmer? Well, there are several reasons, but the main reasons come down to bacteria. Your trimmer is exposed to plenty of things that might harbor bacteria. So when you fail to clean the hair from your trimmer, you are leaving bacteria on the blades, which can cause irritation and infection on your skin.

So if you don’t want such problems on your skin, always clean your trimmer.

How often should you clean your beard trimmer?

The frequency of cleaning your beard trimmer depends on several factors.

Some of these depend on how frequently you use the trimmer and the type of hair you are trimming.

We recommend that once a week, use some cleaning agent to brush through the blades of the trimmer and clean it out. When you clean it often, you reduce the chances of the trimmer causing problems for your skin.

What you will need

  • Soft towel
  • Screwdriver
  • Cleaning Product
  • Warm Water
  • Toothbrush
  • Tiny brush

Cleaning step by step

With the advantages of cleaning in mind, how can you clean correctly? This section covers the steps to take to clean your beard trimmer.

Check the wet/dry capabilities of the trimmer

How to Clean a Beard Trimmer in Four Easy StepsBefore you begin any form of cleaning, you must be sure that your trimmer will survive exposure to water. Even if it is a simple rinse, you must ensure that the trimmer will not be damaged by water.

If the trimmer needs to be plugged in before use, then it is certainly not compatible with water. If you use it with water, you will be electrocuted.

Apart from corded models, some cordless models also are compatible with use with water. Therefore, check out the instruction manual to know whether the product is a wet/dry model.

A wet/dry model is easier to clean and can allow you to deep-clean the device.

One of the best brands that make trimmers and clippers is Wahl. Check out this article about the best products from the brand.

Keep the brush that comes with the trimmer

One mistake that many owners make is throwing out the small brush that comes with the trimmer. This brush is very useful for cleaning the appliance. It is so tiny that it can help you remove small hairs from the trimmer’s teeth and get into crevices you cannot get to with other brushes.

Use the small brush during and after rinsing the trimmer.

Brush the teeth of the trimmer

How to Clean a Beard Trimmer in Four Easy StepsAfter using the trimmer, put soap on a brush and gently brush the teeth of the trimmer under warm water. This brush helps sterilize the trimmer, but it can also remove stray hairs that lie in the teeth. You could also use something like the highly recommended Clippercide Disinfectant Spray to sterilize your trimmer in the cleaning process.

Rinse with hot water afterward.

In summary, these are the steps to follow:

Step 1. Remove the blades from the base of the trimmer by using a screwdriver to remove the attaching screws.

Step 2. Use the brush to comb through the razor attachment of the device. This small device will help remove oil, debris, and other things that might lie within the trimmer.

Step 3. Next, use a cleaning product to remove corrosion. To do this, soak the parts in a solution for some minutes, then scrub with the brush. Repeat this process for as long as possible until the rust comes off. If the rust remains, then you might have to change the blade.

Step 4. After washing, use a clean cloth to wipe down and dry the blade and trimmer parts. Then reattach the parts that you have disassembled.

The video below explains how to clean a waterproof beard trimmer on an example of the Braun BT5090.

Oiling your beard trimmer

There is a small vial of oil that comes with your trimmer. The oil is meant for lubricating your trimmer. If you have thrown it away, you could always replace it with some similar oil. Reviews have introduced us to the Wahl Premium lubricating oil as one of the best on the market. It is recommended due to its ability to prevent rust and related problems in your trimmer’s blade. The oil is important to prevent the blades of the trimmer from becoming dull and affecting its effectiveness.

To oil the trimmer, put a drop or two of oil on the blades every month.

How to Clean a Beard Trimmer in Four Easy Steps

First, clean and dry the blades. After drying it, use the toothbrush to brush the oil evenly across the blades.

Turn on the trimmer for some seconds for the oil to pass through all the teeth of the blade.

Rub off the extra oil on the teeth or the body of the trimmer.

When using oil, avoid using toilet paper to clean the extra oil because the fibers from the tissue can get caught in the teeth of the trimmer.

Can you wash a beard trimmer?

You can use water to wash the blades of the trimmer. However, you must be careful to thoroughly clean it after washing and add some oil. This will prevent corrosion.

Tips on storing your beard trimmer

How to Clean a Beard Trimmer in Four Easy StepsWell, storing the beard trimmer is similar to how you store a razor blade. You will look out for similar things.

To that end, store the beard trimmer in a dry, cool, well-ventilated area. You have to keep moisture away from the trimmer because that can cause corrosion.

Some might throw their trimmer into a cabinet full of other things, but while that seems convenient, it isn’t the best thing. You might cause the transfer of bacteria to the blades of the trimmer.

If your beard trimmer comes with a stand, use the stand. Also, if you can, zip the blades of the trimmer in a case and keep it completely dry every time.

Andis is one of the biggest brands that make trimmers and clippers with stands. You can find some of the best models from the manufacturer here.

Final thoughts

A beard trimmer is a tool that helps you to keep your beard looking great. While it takes care of your beard, you should also take care of it. This involves cleaning the beard trimmer after each use. You should also lubricate the blades and other parts. Maintaining the device also involves storing it in the correct place.

We hope that this article about how to clean a beard trimmer helps you to lengthen the lifespan of your trimmer.

Leave a Reply

Your email address will not be published. Required fields are marked *